VALVULAS NACIONAL S.A., established in Spain in 1976, designs and manufactures safety valves according to API, ASME, ASTM codes and standards, European regulations and directives. The background and capacity to adapt to the needs of the market, have made possible the development of new products adapted to thermo-solar plants, petrochemical, chemical and refineries industries.
Safety valve Model 64
Safety valve 90º angular type of rapid opening (pop action), full nozzle, and spring loaded, adjusting ring, conventional or balanced.
Sizes: 1” x 2” up to 12” x 16”
Pilot operated pressure relief valve able to operate at considerably higher set pressure than with spring loaded safety relief valves, the valve operation and lift are unaffected by back-pressure.
ASME
ASME : Sizes: 1″ x 2″ up to 8″ x 10″ Rating:150# up to 2500#
EN/ISO
Sizes: DN-25 x DN-50 up to DN-200 x DN-250 Rating:PN-10 up to PN-420
Safety valve Model 55
Safety valve 90º angular type of rapid opening, semi nozzle, spring loaded.
Sizes: DN20xDN32 up to DN150xDN250
Safety valve Model 3-51
Safety valve 90º angular type of rapid opening (pop action), full nozzle, and spring loaded, adjusting ring, conventional or balanced.
Tamaños: 1/2″ x 3/4″ up to 1″ x 1″
Safety valve Model 3-50
Safety valve 90º angular type of rapid opening (pop action), full nozzle, spring loaded, adjusting ring.
Sizes: 1/2″ x 3/4″ up to 1″ x 1″
Emergency Valve 2000
Safety device intended for installation on storage tanks with the finality of assure a quick evacuation of large volume of fluid inside the tank in the event of an overpressure due to fire condition.
Sizes:
ASME B16.34: 16”/20”/24”
EN 1092-1: DN400/DN500/DN600
API650: 16”/20”/24″
Breather valve 3400
Breather valve for overpressure and vacuum, with flanged and threaded connections. This valve is categorized in three different types: Breather, Vacuum and Breather/Vacuum combined.
Sizes:
ASME B16.5: 2” up to 10”
EN/ISO 1092-1: DN50 up to DN250
Valve Silencers
Noise exposure increasingly limits system and profitability productivity, Silencers are used to reduce noise in safety valves, relief valves, starter valves, blow valves, blow downs, ejectors, and discharge tanks.
Inlet size NPS 2-40 (according to ASTM A53).
Safety Valves:
Sizes from 1″ x 2” up to 12” x 16″
Emergency Valves:
Sizes & Rating Flanges:
ASME B16.34
Sizes: 16”/20”/24”
Rating: PN10
EN1092-1
Sizes DN400/DN500/DN600
Rating: PN10
API650
Sizes 16”/20”/24”
Breather Valve
Sizes & Ratings:
ASME B16.5:
Sizes: from 2” up to 10”
Rating: #150
EN/ISO 1092-1:
Sizes: from DN50 up to DN250
Rating: PN10
Edificio Albia I – C/ San Vicente, 8
3ª planta – Dpto. 5C
48001 BILBAO (Spain)
Tlf: +34 946 074 663
fluidex@fluidexspain.com